KLAR ELITE
HYDROGEN WATER BOTTLE
15 000 PPB INDUSTRY LEADING H2 RATING
1400+ CLINICAL STUDIES
30 DAY RISK-FREE RETURNS
40+ PROVEN HEALTH BENEFITS
User Manual

Before You Start
Follow these steps below to ensure your KLAR ELITE Hydrogen Water Bottle performs effectively right out the box.
Remove the orange sealing plug from the base.
Ensure the bottle is fully charged (4 bars of battery).
Use mild soap and warm water to thoroughly clean the bottle
(Do NOT get the exterior of the base wet).Fill the bottle with hot water to activate the membrane (~ 60 ° C).
Click the power button twice to allow a 10-minute cycle to run.
After completion, safely discard the water.
Your KLAR ELITE Hydrogen Water Bottle is now clean, charged and ready for use.
*Allow 2-3 uses for electrolysis membrane to warm up before hydrogen generation is at maximum efficacy.*

How To Use
Instructions :
To turn on device, press the power button.
One click for 5-minute cycle.
(7 500 PPB)Two clicks for 10-minute cycle.
(15 000 PPB)To turn off device, hold the power button.
Steps:
After each use, empty the bottle to remove any old water used to keep the membrane wet.
Rinse the bottle thoroughly before refilling to ensure cleanliness.
Fill the bottle close to full capacity with fresh water.
Press the power button to choose your desired cycle.
After the cycle ends, press down on the pressure release valve on top to release built-up pressure.
Twist the lid off & enjoy up to 40+ health benefits!
*Keep a small amount of water at the bottom after each use to keep the electrolysis membrane wet for effective long-term performance*

Wash & Care
We recommend to rinse your bottle before every use & perform deep cleans on a weekly basis.
Deep Clean Instructions:
Disassemble with care, you can twist off the lid and base to reach all areas.
Soft scrub the INTERIOR lid, body, and base using a mild detergent.
Caution: (Do NOT get the exterior of the base wet)Rinse well after cleaning.
Reassemble base and fill with hot water (~ 60 ° C) and leave to soak for 10 minutes, then rinse.
*Once a month before the deep clean, we recommend to soak the membrane in white vinegar to remove water scale build-up to ensure peak molecular hydrogen yield.

Important Notes
To ensure your bottle maintains peak performance and longevity, please read these guidelines. Your adherence to these important notes will prevent potential issues & help you maximise the health benefits that come from the KLAR ELITE Hydrogen Water Bottle.
Do NOT fill your bottle with anything other than WATER. Bottled mineral water or purified water is recommended.
Do repeatedly use more than two consecutive 5-minute cycles without releasing the pressure build-up inside.
Always keep a small amount of water in the bottle to keep the electrolysis membrane wet for effective performance each use.
Do NOT get the exterior of the base wet, as it may cause short circuits or electrical damage.
It is recommend to rinse the bottle before every use & perform deep cleans on a weekly basis (Refer to Wash & Care).
Do not leave your bottle in the sun for an extended period of time, store it in a cool place.
Do not charge for extended periods to avoid battery damage.
Your attention to these details are key to maximizing the performance and lifespan of your bottle.

Returns & Warranty